Product 6/6
New
4592ND 2" 8ohm Coaxial Neo Compression Driver

4592ND 2" 8ohm Coaxial Neo Compression Driver

£399.95
Item is in stock

Description

BMS 4592 2" Coaxial Neo Compression Driver, 3,5" + 1,75" VC 150 W x 80 W 118 dB 8 Ohm


Features:

• Extended Bandwidth (300 - 22000 Hz)
• Neodymium Magnet Assembly
• With two subsystems in one, each Driver covers a smaller Frequency Range for increased Power Handling, high Dynamic and extremely low Distortion
• Excellent Phase Coherence
• Perfect Time Alignment without Problems of Multi-Source Interference
• Ultra light Weight
• 16 Ohm


The patented design of the BMS 4592 is a result of extensive dedicated research and development providing dramatic improvement in dynamic response, clarity and transparency. The BMS annular midrange diaphragm covers the frequency range between 300 and 7000 Hz with a smooth, linear response. The large diaphragm excursion of max. + / - 0,8 mm results in high output and increased power handling up to 1300 W peak.

The ultra light annular diaphragm for the high range offers exceptional transient response with very high efficiency from 6 to 22 kHz. The unique voice coil technology employs a light weight Copper Clad Aluminium wire wound inside and outside of the Kapton™ former to improve the heat dissipation, dramatically increasing the acoustic output and reliability of the driver while minimises the power compression. The use of high grade neodymium magnets provide improved performance while significantly reducing transducer weight.


Specifications:

•Throat diameter: 2" (50.8 mm)
•Nominal impedance: 8 Ohm
•Power capacity: W
•Middle Range (AES): 150 W AES above 400 Hz
•Peak: 1000 W peak above 500 Hz
•High Range (AES): 80 W
•Peak: 320 W
•Sensitivity 1 W / 1 m: 118 dB on 2242 Horn
•Frequency Range: 300 - 22000 Hz
•Recommended Crossover: 300 Hz
•Middle Frequency Range: 300 - 7000 Hz
•High Frequency Range: 6000 - 22000 Hz
•Middle / High Crossover: 6300 Hz
•Voice Coil High-Range: 1.75" (44.4 mm)
•Voice Coil Mid-Range: 3.5" (90 mm)
•Magnet Material: Neodymium
•Flux Density Mid-Range (Tesla): 1.95
•Flux Density High-Range (Tesla): 2.0
•Efficiency: 35 % (300 - 5000 Hz)
•Voice Coil Material: Copper Clad Aluminum (2 Layers in- and outside of the VC)
•Voice Coil Former: Kapton TM
•Diaphragm Material: Polyester


Mounting Information:

•Overall Diameter: mm 132 (+/- 3 mm)
•Depth: mm 113
•Net Weight: kg 2.3
•4 x M6 Holes 90° on 101.6 mm 4" Diameter

Features

  • Model: BMS 4592ND
  • Shipping Weight: 2.3kg
  • 10 Units in Stock
  • Manufactured by: BMS

Reviews

Be the first to write review.