New
10NDA610 /8

10NDA610 /8

£275.00
Item is in stock

Description

Description

The 10NDA610 is a high power, very high output, state-of-the-art midrange transducer for high quality professional use. The high level of sound reproduction is achieved thanks to extensive research by Eighteen Sound engineers, which focused on implementing mid frequencies intelligibility. The 10NDA610 is ideally used as a midrange in both horn and direct radiation, closed or reflex enclosures, as small as 4 litres. The 10NDA610 incorporates an Active Impedance Control (A.I.C.) consisting of an additional coil fixed on the pole piece and connected in parallel to the moving coil. The magnetic field generated by this coil has the following effects: 1) Impedance linearization 2) Acoustic and electric phase linearization 3) Significant increase of sensitivity and total SPL 4) Total harmonic distortion reduction 5) Constant power transfer The A.I.C. offers substantial advantages to the sound quality by not absorbing the moving coil's electromagnetic energy. The extremely powerful external neodymium magnet assembly assures high flux concentration, low power compression and excellent heat exchange. The levels of force factor and power handling are consequently at a top professional level, with the best power to weight ratio on the market today. The curvilinear cone, made with a high damping wood pulp, has been designed to achieve the best possible linearity within its frequency range. The in-house developed cone treatment acts as humidity repellent and significantly dampens bell mode resonances. The 75mm edge-wound voice coil assembly is wound on a strong fiberglass former to improve force transmission and power handling. A proprietary humidity-block cone treatment makes the transducer suitable for outdoor use in adverse weather conditions. In addition, a special coating applied to both the top and back plates makes the 10NDA610 far more resistant to the corrosive effects of salts and oxidization.

General Specifications

Nominal Diameter 260mm (10 in)
Rated Impedance 8 Ohm
AES Power 400W
Program Power 600W
Peak Power 1200W
Sensitivity 103dB
Frequency Range 100 - 6100 Hz
Power Compression @-10dB 0,5 dB
Power Compression @-3dB 1,5 dB
Power Compression @Full Power 2,1 dB
Max Recommend. Frequency 4000 Hz
Recommend. Enclosure Volume 4 - 15 lt. (0,14 - 0,53 cuft)
Minimum Impedance 6,5 Ohm at 25°C
Max Peak To Peak Excursion 13 mm (0,51 in)
Voice Coil Diameter 75 mm (3 in)
Voice Coil winding material aluminium
Suspension Double roll, poly cotton
Cone Curvilinear, Paper

Thiele Small Parameters

Fs 89 Hz
Re 5,5 Ohm
Sd 0,035 sq.mt. (54,25 sq.in.)
Qms 7,1
Qes 0,24
Qts 0,23
Vas 18 lt. (0,64 cuft)
Mms 30 gr. (0,07 lb)
BL 20,3 Tm
Linear Mathematical Xmax ±2,5 mm (± 0,10 in)
Le (1kHz) 0,06 mH
Ref. Efficiency 1W@1m (half space) 98 dB

Mounting information

Overall diameter 260 mm (10,24 in)
N. of mounting holes and bolt 4 on diam. 275 mm (4 on 10,83 in) 8 on diam. 244,5 mm (4 on 9,63 in)
Mounting holes diameter 7,15 mm (0,28 in)
Front mount baffle cut out ø 232 mm (9,13 in)
Rear mount baffle cut out ø 232 mm (9,13 in)
Total depth 96 mm (3,78 in)
Flange and gasket thickness 14,5 mm (0,57 in)
Net weight 3,5 kg (7,7 lb)
Shipping weight 3,9 kg (8,58 lb)
Packaging Dimensions 3,9 kg (8,58 lb)

Features

  • Model: 10NDA610
  • Shipping Weight: 3.9kg
  • 10 Units in Stock
  • Manufactured by: 18 Sound

Reviews

Be the first to write review.